Rated 5 Stars Across 37 Google Reviews

Sydney Paint Correction That Actually Lasts

Pogi Detailing Co. removes swirl marks, scratches and oxidisation from your car's paint using machine polishing, serving Inner West and Central West Sydney. Get your quote back within the hour.

Get a Free Quote Now

Or call now: 0424 446 351

Why Sydney Drivers Get Paint Correction Done

Swirl marks and scratches do not just look bad under direct sunlight. They break down your clear coat over time. Once the clear coat goes, you are looking at respray costs, not polish costs. Paint correction stops that from happening.

If you are planning to sell, trade in or just want your car to hold its value, the condition of your paint is the first thing a buyer or dealer notices. A car with dull, swirl-marked paint loses thousands at resale. One that looks sharp commands better offers and sells faster.

For drivers across Parramatta, Auburn, Lidcombe and the Inner West, daily driving through stop-start traffic, tight car parks and automatic car washes takes a toll on paint year after year. Paint correction is how you reverse that damage and reset your car back to how it should look.

Get a Free Quote Now

What a Proper Paint Correction Looks Like

Before-and-after examples of the standard we work to on every job.

Before Paint Correction BEFORE
After Paint Correction AFTER

Paint Correction Packages

Choose the level of protection that's right for your vehicle.

Single Stage

  • ✓ Full exterior wash and decontamination
  • ✓ Clay bar treatment to remove bonded surface contaminants
  • ✓ One-stage machine polish to reduce light swirl marks and hazing
  • ✓ Paint depth reading before and after correction
  • ✓ Panel wipe-down and finishing inspection
  • ✓ Suitable for newer cars or light paint defects
Get a Free Quote
Most Popular

Two Stage

  • ✓ Full exterior wash, iron decontamination and clay bar treatment
  • ✓ Paint depth readings across all panels
  • ✓ Cut stage to remove deeper scratches, swirl marks and water etching
  • ✓ Finishing stage to refine and maximise gloss
  • ✓ Panel-by-panel inspection under detailing lights
  • ✓ Suitable for daily drivers with moderate to heavy paint defects
Get a Free Quote

Multi-Stage

  • ✓ Full exterior wash, chemical and mechanical decontamination
  • ✓ Comprehensive paint depth and hardness assessment
  • ✓ Multiple cut and refining stages tailored to each panel's condition
  • ✓ Spot correction for isolated deeper defects
  • ✓ Finishing polish to achieve maximum gloss and clarity
  • ✓ Final wipe-down and full panel inspection under studio lighting
  • ✓ Recommended for show cars, prestige vehicles or paint in heavy distress
Get a Free Quote

The Paint Correction Process

1

Wash and Decontamination

The car gets a thorough hand wash to remove loose dirt, then an iron remover and clay bar treatment to pull bonded contaminants out of the paint. Skipping this step means polishing grit into your clear coat, which makes defects worse. We do not skip it.

45 to 60 minutes
2

Paint Inspection and Depth Reading

We measure paint thickness across every panel using a digital gauge before touching the car with a machine. This tells us exactly how much correction is safe, which stages are needed, and flags any panels that have been previously resprayed and need careful handling.

20 to 30 minutes
3

Machine Polishing and Correction

Using dual-action and rotary polishers with the right compound and pad combination for each panel, we work section by section to cut out swirl marks, light scratches, water etching and oxidisation. Multi-stage jobs cycle through progressively finer compounds until the paint is clean.

3 to 8 hours depending on tier and vehicle size
4

Refinement and Gloss Enhancement

After cutting, each panel is refined with a finishing polish to maximise depth and gloss and remove any micro-marring left by the compound stage. This is what separates a result that looks good in photos from one that looks exceptional in real life.

1 to 2 hours
5

Final Inspection and Panel Wipe-Down

Every panel gets a final wipe with an IPA solution to strip any polish residue and reveal the true result. We inspect the whole car under detailing lights before handing it back. If something is not right, we fix it before you see the car.

30 minutes
Get a Free Quote Now

What Our Clients Say

37 five-star reviews on Google

★★★★★

"Just had my car detailed by Pogi Detailing, did an amazing job and my car is literally looking brand new after having 2 years of junk in there. Highly Recommend and prices are worth the quality provid"

Ivanshu Patel

★★★★★

"Genuinely insane how clean it is now, beyond worth it!"

Nicholas Chakovan

★★★★★

"10/10 - the boys done a very throughout job & couldn’t of been happier with their work. Thank you both so much. Will definitely recommend to friends & family and will see you guys again !"

Blair Kirk

★★★★★

"I am blown away by the quality of work. My car is back to its original state. Looks and feels brand new again. The attention to detail is unmatched. Highly recommended if you want a showroom finish. T"

Junior Pablo

★★★★★

"Had my car detailed by Pogi and couldn’t be happier with the job. The car came up absolutely mint — inside and out. His attention to detail is spot on and you can tell he takes a lot of pride in his w"

Donovan Sewell

Paint Correction FAQ

Pogi Detailing Co. offers three correction tiers, Single Stage, Two Stage and Multi-Stage, to suit different budgets and paint conditions. Pricing depends on the level of correction required, the size of your vehicle and the current state of the paint. Get a free quote and John Carlo will assess what your car actually needs before recommending anything.
A Single Stage correction typically takes three to five hours. A Two Stage correction on a mid-size car usually runs five to eight hours. Multi-Stage jobs on larger or heavily defected vehicles can take a full day or more. You will get a clear time estimate when you request your quote.
Paint correction results are permanent in the sense that the defects removed are genuinely gone, not filled or masked. How long your paint stays looking that way depends on how you wash and maintain it after the correction. Automatic car washes and poor wash technique will reintroduce swirl marks over time. Following up with a ceramic coating significantly extends how long the result holds.
Yes. The main thing that reintroduces swirl marks is poor wash technique, especially using automatic car washes, dirty sponges or wiping with a dry cloth. Switching to a proper two-bucket hand wash method is the single biggest thing you can do to keep the paint looking corrected. Adding a paint protection layer like a ceramic coating on top of the correction gives you significantly better protection going forward.
The correction work itself is guaranteed. If there is an issue with the result that is due to our process, John Carlo will sort it out. Warranty on any additional protection product applied after correction, such as a ceramic coating, depends on the specific product used and will be discussed with you at the time of service.
A cut and polish from a tyre shop or quick-detail service typically uses an aggressive compound to remove surface defects, then leaves the paint without a proper finishing stage. This can leave micro-marring and buffer trails that look worse under direct light. Machine polishing done properly cycles through multiple stages and compounds to both correct defects and refine the finish, so the result holds up in all lighting conditions.
Paint correction removes defects that are within the clear coat layer, which covers the majority of swirl marks, light scratches, water etching, oxidisation and hazing. Scratches that have gone through the clear coat and into the colour layer or primer cannot be polished out and typically require touch-up paint or a panel respray. John Carlo will assess your paint and be straight with you about what correction can and cannot fix before any work starts.
Pogi Detailing Co. services a broad area across Inner West and Central West Sydney, including Parramatta, Auburn, Lidcombe, Granville, Merrylands, Fairfield, Ryde, Eastwood, Blacktown, Castle Hill, Kellyville, Norwest, Baulkham Hills, Wetherill Park, Seven Hills and surrounding suburbs. If you are not sure whether we cover your area, get in touch and we will confirm it quickly.

Get Your Paint Corrected Before the Damage Gets Worse

John Carlo covers Inner West and Central West Sydney and gets quotes back within the hour.

Or call now: 0424 446 351